Bring-up of the PURWA-IOT-EVK evaluation board#383
Open
ximiali wants to merge 33 commits intoqualcomm-linux:qcom-6.18.yfrom
Open
Bring-up of the PURWA-IOT-EVK evaluation board#383ximiali wants to merge 33 commits intoqualcomm-linux:qcom-6.18.yfrom
ximiali wants to merge 33 commits intoqualcomm-linux:qcom-6.18.yfrom
Conversation
ximiali
force-pushed
the
purwa-iot-evk
branch
2 times, most recently
from
f186180 to
c7d7d3b
Compare
…over both USB and UART" This reverts commit 79c46a0. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
…al zone configuration" This reverts commit d0849ee. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
…DT overlay" This reverts commit edfe235. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
…hamoa iot evk board" This reverts commit 731b038. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
… support for Type-A ports" This reverts commit 5cee34b. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
This reverts commit ba8c93d. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
ximiali
force-pushed
the
purwa-iot-evk
branch
2 times, most recently
from
4ecda7a to
fc0fb0e
Compare
This reverts commit 5c5ee78. Signed-off-by: Yushan Li <yushan.li@oss.qualcomm.com>
…r HAMAO-IOT-EVK board" This reverts commit 85bf4e6. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
…AMOA-IOT-SOM platform" This reverts commit 6a60721. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
This reverts commit 5339851. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
…ED variants X1/X1 Plus variant of the said device comes in either FHD+ OLED or FHD+ LCD panel, and shares the same model number UX3407QA. It appears LCD panel's brightness adjustment is PWM backlight controlled, so a dedicated device-tree is required. Introduce dedicated compatibles with fallback to 'asus,zenbook-a14-ux3407qa' as they are otherwise the same. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Aleksandrs Vinarskis <alex@vinarskis.com> Link: https://lore.kernel.org/r/20250927-zenbook-improvements-v3-1-d46c7368dc70@vinarskis.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The laptop comes in two variants: * UX3407RA, higher end, FHD+ OLED or WOXGA+ OLED panels * UX3407QA, lower end, FHD+ OLED or FHD+ LCD panels Even though all three panels work with "edp-panel", unfortunately the brightness adjustmenet of LCD panel is PWM based, requiring a dedicated device-tree. Convert "x1p42100-asus-zenbook-a14.dts" into ".dtsi" to allow for this split, introduce new LCD variant. Leave current variant without postfix and with the unchanged model name, as some distros (eg. Ubuntu) rely on this for automatic device-tree detection during kernel installation/upgrade. As dedicated device-tree is required, update compatibles of OLED variants to correct ones. Keep "edp-panel" as fallback, since it is enough to make the panels work. While at it moving .dts, .dtsi around, drop 'model' from the top level x1-asus-zenbook-a14.dtsi as well. Co-developed-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex@vinarskis.com> Link: https://lore.kernel.org/r/20250927-zenbook-improvements-v3-2-d46c7368dc70@vinarskis.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
…uetooth Unlike UX3407QA with WCN6855, UX3407RA comes with WCN7850. Definitions were not added during initial bringup due to lack of hardware to test it. Add missing definitions that were now confirmed to work. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex@vinarskis.com> Link: https://lore.kernel.org/r/20250927-zenbook-improvements-v3-3-d46c7368dc70@vinarskis.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the HAMOA-IOT-EVK board only 2 out of 4 speakers were functional. Unlike the CRD, which shares a single GPIO reset line for WSA1/2, this board provides a dedicated GPIO reset for each WSA, resulting in 4 separate reset lines. Update the device tree accordingly so that all 4 speakers can playback audio as expected. Signed-off-by: Le Qi <le.qi@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251010033728.1808133-1-le.qi@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
…for Type-A ports The Multiport controller on Hamoa EVK platform is connected to Two Type-A ports. VBUS for each of these ports are provided by a TPS2559QWDRCTQ1 regulator, controlled from PMIC GPIOs. Add the necessary regulators and GPIO configuration to power these. Implement connector nodes to embed the vbus supply within them. Since there is no entity currently that can read vbus supply from a Type-A connector and control it, mark the supplies as always on. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251219161407.2075701-1-krishna.kurapati@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
… EVK board WLAN card is connected to PCIe4 on Hamoa IoT EVK board. Add WLAN node to support power sequence for this WLAN card. Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251210032817.1264850-1-yingying.tang@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add RED and GREEN LED channels for the RGB device connected to PMC8380C PWM-LED pins. Omit BLUE channel to match default hardware setup where it's tied to EDL indicator. Signed-off-by: Tingguo Cheng <tingguo.cheng@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251114-add-rgb-led-for-hamoa-iot-evk-v3-1-5df1fcd68374@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
…DP panel The backlight on the Hamoa IoT EVK is controlled through a PWM signal. Aligned with other x1e80100-based platforms: the PWM signal is controlled by PMK8550, and the backlight enable signal is handled by PMC8380. Describe the backlight device and connect it to the eDP panel to allow for brightness control. Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251112-hamoa_dvt_backlight-v3-1-f35b44af7fc4@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
…PCIe port nodes and add port Nodes for all PCIe ports Since describing the PCIe PHY directly under the RC node is now deprecated, move the references to the respective PCIe port nodes, creating them where necessary.Also add port nodes for PCIe5 and PCIe6a with proper PHY references. And also move the PCIe PERST and wake GPIOs from the controller nodes to the corresponding PCIe port nodes on Hamoa-based platforms: - x1e001de-devkit - x1e78100-lenovo-thinkpad-t14s - x1e80100-asus-vivobook-s15 - x1e80100-asus-zenbook-a14 - x1e80100-dell-xps13-9345 - x1e80100-lenovo-yoga-slim7x - x1e80100-microsoft-romulus - x1e80100-qcp Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260109104504.3147745-2-ziyue.zhang@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
…SOM platform HAMOA IoT SOM requires PCIe3 and PCIe5 connectivity for SATA controller and SDX65. Add the required sideband signals (PERST#, WAKE#, CLKREQ#), pinctrl states and power supply properties in the device tree, which PCIe3 and PCIe5 require. Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com> Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260109104504.3147745-3-ziyue.zhang@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
…OT-EVK board HAMAO IoT EVK uses PCIe5 to connect an SDX65 module for WWAN functionality and PCIe3 to connect a SATA controller. These interfaces require multiple voltage rails: PCIe5 needs 3.3V supplied by vreg_wwan, while PCIe3 requires 12V, 3.3V, and 3.3V AUX rails, controlled via PMIC GPIOs. Add the required fixed regulators with related pin configuration, and connect them to the PCIe3 and PCIe5 ports to ensure proper power for the SDX65 module and SATA controller. Move reset and wake GPIO properties from RC nodes to port nodes. Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com> Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260109104504.3147745-4-ziyue.zhang@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow the example of other platforms and rename X1P42100 to purwa.dtsi. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251030-rename-dts-2-v1-3-80c0b81c4d77@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the device tree bindings for the PURWA-IOT-EVK board, which uses the Qualcomm X1P42100 SoC. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260202073555.1345260-1-yijie.yang@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the Purwa-IoT-EVK board to the list to enable access to EFI variables. Guarantee that subsystems relying on SCM services can access secure-world features. This change improves reliability and prevents missing functionality or boot-time issues by making service availability explicit. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260202073555.1345260-2-yijie.yang@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PURWA-IOT-SOM is a compact computing module that integrates a System on Chip (SoC) — specifically the x1p42100 — along with essential components optimized for IoT applications. It is designed to be mounted on carrier boards, enabling the development of complete embedded systems. Purwa uses a slightly different Iris HW revision (8.1.2 on Hamoa, 8.1.11 on Purwa). Support will be added later. Make the following peripherals on the SOM enabled: - Regulators on the SOM - Reserved memory regions - PCIe3, PCIe4, PCIe5, PCIe6a - USB0 through USB6 and their PHYs - ADSP, CDSP - Graphic Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260202073555.1345260-3-yijie.yang@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PURWA-IOT-EVK is an evaluation platform for IoT products, composed of the Purwa IoT SoM and a carrier board. Together, they form a complete embedded system capable of booting to UART. PURWA-IOT-EVK uses the PS8833 as a retimer for USB0, unlike HAMOA-IOT-EVK. Meanwhile, USB0 bypasses the SBU selector FSUSB42. Make the following peripherals on the carrier board enabled: - UART - On-board regulators - USB Type-C mux - Pinctrl - Embedded USB (EUSB) repeaters - NVMe - pmic-glink - USB DisplayPorts - Bluetooth - WLAN - Audio - PCIe ports for PCIe3 through PCIe6a - TPM Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260202073555.1345260-4-yijie.yang@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable IMX577 via CCI on Hamoa EVK Core Kit. The Hamoa EVK board does not include a camera sensor by default, this DTSO has enabled the Arducam 12.3MP IMX577 Mini Camera Module on the CSI-1 interface. Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com> Link: https://lore.kernel.org/all/20260227-hamoa_evk-v1-2-36f895a24d8f@oss.qualcomm.com/
…onfiguration Hamoa IOT boards support a different thermal junction temperature specification compared to the base Hamoa platform due to package level differences. Update the passive trip thresholds to 105°C to align with the higher temperature specification. Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260302-higher_tj-v1-1-4c0d288f8e7f@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
…h USB and UART When Bluetooth supports both USB and UART, the BT UART driver is always loaded, while USB is hot-pluggable. As a result, when Bluetooth is used over USB, the UART driver still be probed and drive BT_EN low, which causes the Bluetooth device on USB to be disconnected. Configure BT_EN as a GPIO hog so that it is controlled by the platform instead of the UART driver, preventing BT over USB from being unintentionally powered down. Link: https://lore.kernel.org/all/20260311090921.1892191-1-shuai.zhang@oss.qualcomm.com/ Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>
… compatible Document QMP UFS PHY compatible for x1e80100 SoC. Use SM8550 as a fallback since x1e80100 is fully compatible with it. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com> Link: https://patch.msgid.link/20260106154207.1871487-2-pradeep.pragallapati@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
…ble for x1e80100 Add UFS Host Controller (UFSHC) compatible for x1e80100 SoC. Use SM8550 as a fallback since x1e80100 is fully compatible with it. Qualcomm UFSHC is no longer compatible with JEDEC UFS-2.0 binding. Avoid using the "jedec,ufs-2.0" string in the compatible property. [mkp: conflict resolution] Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com> Link: https://patch.msgid.link/20260211132926.3716716-2-pradeep.pragallapati@oss.qualcomm.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add UFS host controller and PHY nodes for x1e80100 SoC. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260211132926.3716716-3-pradeep.pragallapati@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable UFS for HAMOA-IOT-EVK board. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260211132926.3716716-4-pradeep.pragallapati@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
12 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Introduce the device tree, DT bindings, and driver updates required to enable the bring-up of the PURWA-IOT-EVK evaluation board.
CRs-Fixed: 4480195